Free Alternate Energy

 

"Free Insider Energy Saving Tips"

By Using Hot Water Pipe Insulation
You Will Save Money and Energy

Here are two very good and important points you need to know if you truly want to save money with your hot water system.

Point 1 - Insulating Your System: By adding insulation around the outside of your water heater you’re keeping the heat inside the tank and reducing the need to keep the heat turned up. This really works very well and is a must if you live in colder climates.

Point 2 - Insulating Your Pipes: When adding the insulation tom your actual water heater to save energy I highly recommend you do the same with the hot water piping.

The thing is that when the hot water is traveling to its destination, it stays as hot as possible without loosing heat like it would if the pipes were un-insulated. You see… If the water becomes cooler you’re going to be tempted to raise the temperature on your hot thermostat. When you insulate the pipes, the temperatures will remain the same.

You can locate easy to use foam pipe insulation for your pipes at just about any hardware store, ebay and even online auctions. When you take ownership of the insulation simply cut it to size and put it over the piping.

By using a sharp knife you can cut and insert it over the top of the piping easily. Be sure you measure for a nice tight fit and secure it over the piping with some duct tape.
When insulating a corner joint, bend the foam to fit over the piping and secure it with the duct tape to cover any of the slits you made to fit the bends.

Consider insulating the cold water pipes too if you live in an area where the climate becomes very hot as it will also help with saving water. The cold water pipes often sweat then drip onto hot pipes possibly lowering temperatures even further. Insulating your cold water pipes will help protect them from freezing or breakings during winter months when freezing temperatures take their toll.

Here's What You Can Do...  

1. Want to learn how to NEVER pay another electricity or power bill ever again?

I have some good news for you... After spending months reviewing the best ways to save energy I’ve found some incredible systems that I personally recommend and use. Click on the links I recommend below as they have my highest recommendations.

 Highest Recommendation Is Magnet Power:  CLICK HERE To See How This System Works

 Solar Energy: 2nd Energy Saving System - CLICK HERE

 Wind Energy: 3rd Energy Saving System - CLICK HERE 


2.
 If you haven’t already… I suggest you grab my free insider “Energy Saving Tips”

With these tips I’m going to show you how to save hundreds even thousands on your power bills each and every year. Just fill in the form below and I’ll start emailing you my special guide on energy saving tips right away.

P.S: HERE'S SOMETHING YOU PROBABLY DON'T KNOW... When you decide to use one of the three energy saving systems I recommend below, you'll not only be able to completely wipe your power bills forever (saving you thousands, even tens of thousands of dollars for years to come)

BUT... 

You'll also learn how to actually get the big power companies to "PAY YOU" for the free energy you create and provide back to the grid.

How cool is that?

Navigation
Home
 
Testimonial
"Hey Mark, the information here was really good and I appreciate your free tips. I was looking for a really good device I could make myself and I found it here on your website. Thank you."

-- Josh Dosy, NY

"Thank you for the free tips. I used some of the tips and they actually do work."

-- Roslyn Hash

"I originally knew this type of information was available but had no idea where to find it. You recommended a number of alternative methods and I have invested in three.

Do they work? In a word yes."

There is a little learning curve but hey, it's that way with everything. Now I can say with complete confidences my energy bill (11 and a half months later) are only 7% to 11% of what they were back in 2004. And that's with the hiked prices.

-- Michael Dorson